Star Micronics NX-15 Printer User Manual


 
180
(ESC) CHR$(25) CHR$(4)
(ESC) CHR$(25) “R”
(ESC) CH,R$(32)n
(ESC) “!” n
(ESC) “#”
(ESC) “$” nl
922
(ESC) “~0” O
(ESC>
“~0” 1
(ESC) “&” CHR$(0) nl
(ESC) “*” nO nl n2 ml
(ESC) “+” CHR$(l)
Selects auto feed mode
Ejects paper
Adds n dot spaces between
characters
Sets the master print mode
Accepts the value of the eighth data
bit as is
Moves the print head to an absolute
horizontal position
Cancels download character set
Selects download character set
2 mOml .....
mll [m12 .....m46]
Defines download characters into
RAM
n2 ...
Selects graphics modes
Executes macro instruction
(Esc) “+” ..... CHR$(30)
Defines macro instruction
(ESC) “-” O
Cancels underlining
(ESC) “-” 1
Selects underlining
(ESC) “/”
nO
Selects vertical channels
(ESC) “O”
Sets line spacing to 1/8 inch
(ESC) “l”
Sets line spacing to 7/72 inch
(ESC) “2”
Sets line spacing to 1/6 inch, or Uses
(ESC)”A” definition
(ESC) “3” n
Sets line spacing to n/216 inch
(ESC) “4”
Selects italic characters
(ESC) “5”
Cancels italic characters
(ESC) “6”
Expands the printable area, or
Selects character set #2
(ESC) “7”
Cancels the expansion of printable
area, or Selects character set #1
(ESC) “8”
Disables paper-out detector
(-ESC) “9”
Enables paper-out detector
(ESC) “:” CHR$(0) CHR$(0) CHR$(0)
Copies standard ROM font into RAM
(ESC) “(”
Selects one-line uni-directional print-
ing
(ESC) “=”
Sets the value of the eighth data bit
to logical O