Star Micronics NX-2415II Printer User Manual


 
SETTING UP
Place the printer in the desired location, and remove all packing material
from the printer. This packing material is intended to prevent damage to the
printer while in transit.
You will want to keep allthe packing material, along with the printer carton,
in case you have to move the printer to a new location.
Installing the platen knob
The platen knob is packed into a recess of the packing material which held
your printer inside the printer carton. Be careful to remove the knob before
disposing of the package.
Mount the knob on the platen shaft, which is located on the right-hand side
of the printer. Rotate the knob on the shaft before pushing the knob fully into
position.
Figure 2-2. Installing the platen knob
9