Star Micronics NX-2415II Printer User Manual


 
SERIAL INTERFACE CARTRIDGE
To run the printer in serial mode, you should use the optional Serial Interface
Cartridge, IS-8XL.
The procedure for installing the interface cartridge is:
1. SettheDIP switchesontheIS-8XL before attaching ittotheprinter.(See
next page for detailed information.)
2. Turn off the power switch and disconnect the power cord from thepower
source.
3. Disconnect the interface cable if attached.
4. Slide out the parallel interface cartridge by gripping the flips on both
sides.
5. Insert the Serial interface cartridge all the way, as shown in Figure 7-16.
.,
I
Figure 7-17. Replace the interface cartridge.
6. Connect the Serial interface cable both to the printer and to your
computer.
63