Star Micronics NX-2415II Printer User Manual


 
Set bottom margin
Mode
ASCII Decimal
Hexadecimal
Both
<ESC> “N” )7
27 78 n 1
B 4E 17
Sets the bottom margin ton lines, where n is between 1and 127 in
Standard mode or between 1 and 255 in IBM mode. The bottom
margin is reset when you change the page length.
Cancel bottom margin
Mode ASCII Decimal
Hexadecimal
Both <ESC> “0”
27 79
IB 4F
Cancels the bottom margin.
Formfeed
IModel ASCII I Decimal
] Hexadecimal I
Both
<FF>
12
Oc
Feeds the paper to the top of the next page according to the current
page length, and moves the print position to the left margin. When
friction feed is used, this command ejects the current page.
Set vertical tab stops
Mode] ASCII Decimal
Hexadecimal
I Both I <ESC> “B” ,,/ rz2 .... <0> I 2766 nl rz2 .0 I IB
42 nl t72 .00 I
Cancels all current vertical tab stopsand sets new vertical tab stops
at lines nl, n2, etc., where nl, n2, etc. are numbers between 1 and
255. The maximum number of vertical tab stops allowed is 16 in
Standard mode and 64 inIBM mode. The tab stopsmustbespecified
in ascending order; any violation of ascending order terminates the
tab stop list. Standard termination is by the <0> control code. The
vertical tab stops are set in terms of the current line spacing and do
not move if the line spacing is changed later.
84