Star Micronics NX-2415II Printer User Manual


 
Loading paper
1.
7
-.
3.
4.
If fanfold paper has already been loaded into the printer, park the paper
through the rear slot.
Push the printer release lever toward the rear of the printer ( ~ ) to load
single sheets.
Pull the paper loading lever toward the front of the printer to draw the
hopper out until it is in position.
Adjust the left paper guide to the desired left position by moving it
horizontally in either direction.
Figure 7-7. Adjust the paper guides to accornrnmlatethewidthof the PaPer
5: Fan the paper stack and square it off properly before inserting it into the
Automatic Sheet Feeder.
Figure 7-8. Fanthe paper before inserting it into the ASF.
57