![](http://pdfasset.owneriq.net/2/45/245e9a9f-6cea-4953-ac38-3e5a9211fbcc/245e9a9f-6cea-4953-ac38-3e5a9211fbcc-bg14.png)
3. Guide the ribbon between the print head and the silver print head shield,
making certain thatthespindlesonthecartridge holderfitintothe sockets
on the cartridge itself.
Figure 2-5. Install the ribbon cartridge
4. Make sure that the ribbon is positioned between the print head and the
print head shield as shown in Figure 2-5.
5. Take up the slack in the ribbon again by turning the tension knob.
Figure 2-6. Make sure that the ribbon is positioned correctly.
11