Star Micronics NX-2415II Printer User Manual


 
,
& A
t II
Select Bank
Select Switch
Exit
Print Change Setting
9
chapter5
DEFAULT SETTINGS-EDS MODE
From the control panel you can change the parameters that define how your
printer works. These parameters become your power-on settings. This
function is called the Electronic DIP Switch (EDS) mode.
HOW TO SET THE EDS MODE
The EDS mode in this printer has 16functions that you can set as the power-
on default settings.
Turn the printer on while simultaneously holding down the (SET/EJECT)j
(PAPER FEED), and (ON LINE) buttons. You will hear an acknowledging
beepas power comes on.This indicatesthatyouhaveenteredthe EDS mode.
In EDS mode, the buttons on the control panel are used as shown below in
Figure 5-1.
r-
L
Figure 5-f. Button functions in the EDS mode
Use the(m) button to select the Bank Letter.
Use the (-) button to select the Switch Number.
The ON LINE indicator shows the current setting, ON or OFF.
Use the (ON LINE) button to change the settings.
Press the(PAPER FEEobutton to print the current settings.
Press the (SET/EJECT) button to save and exit the EDS mode.
41