Filter
Top Products
Setting
The procedure for installing the Pull tractor unit is:
1. Attach the paper support to the pull tractor.
Figure 7-11.Attach the paper support to the pull tractor
2. Remove the front cover and the paper guide from the printer.
3. Settherelease leverto the front of the printer(~), thenpullthebaillever
towards you to release the bail roller from the platen.
4. Pressing the right and left lock levers, align the fitting area of the pull
tractor with that of the printer body, and push the pull tractor from the top
gradually until it is set in place correctly.
Figure 7-12. Place the pull tractor unit onto the printer.
5. Install the printer cover provided with the pull tractor unit.
60