Star Micronics NX-2415II Printer User Manual


 
I
FUNCTIONS OF THE EDS SETTINGS
The printer stores the parameters thatyou select from the controlpanel while
in the EDS mode.
A default is the setting that the printer will use if none is specifically selected
by a program. When you first turn on or later reset yourprinter, these default
settings will take effect.
By changing the settings, you can alter various printer functions to match
your specific requirements. The following table will help you choose the
proper settings.
nk-Switch Function
j ON
I
OFF
A-1 Emulation
Standard/Epson
I IBM
1
Bar
A-z
AEC Mode
I Enabled
Disabled
A-3 RAM Usage
Input Buffer
Download buffer
A-4 Automatic Sheet Feeder I Not installed
\ Installed
A-5 Auto LF with CR
Disabled
Enabled
B-I - Graphics Direction
Bi-directiomd
Uni-directional
Disabled
B-2
Paper-ou[
Enabled
B-3 Printable Area
Type A 1 Type B
B-4 (Reserved)
Leave ON
B-5 CR Centering
Disabled I Enabled
B
c-1
C.2
Page Length
I (See below)
I
c-3
c-4
Print Pitch
c-5
(See below)
D-t Print Mode
Letter Quality
Draft
D-2 Character Table
Standard mode
Graphics
Italics
IBM mode
IBM #2
IBM #l
D-3 Code page or
D-4 International
(See below)
D-5
Character Set
E-1
E-2 LQ Font Selection
(See below)
E-3
E-4 (Reserved)
Leave ON
E-5 (Reserved)
Leave ON
NOTE: The default is ON for all functions at purchase except B-1 and B-3
which are set to the OFF position.
42