TANDBERG MPS 800 Network Card User Manual


 
D 13373.08
NOVEMBER 2007
MPS
Table of
Contents
TANDBERG MPS
ADMINISTRATOR GUIDE
Upgrade
Software Upgrade
Software Upgrade
New software to the TANDBERG MPS can be installed via
the Software Upgrade web page.
The Software Upgrade page shows the current software ver-
sion, the hardware serial number and the installed options
and the option keys.
System Information - Software Version: Shows the cur-
rently installed Software version.
System Information - Hardware Serial Number: Shows the
unique hardware serial number of the TANDBERG MPS at
hand. The TANDBERG MPS serial number must be provided
when ordering a Software Upgrade.
System Information - Current Option Key: Shows the cur-
rent installed Option Keys.
Software Option - Add Option Key: Enter the option key in
the Key field and press ‘Add Option’. The system will validate
the key. When validated, feel free to add more option keys in
the same manner. However, to get the new options up and
running, the TANDBERG MPS must be restarted. Please use
the Restart button on the bottom of this page.
Install Software - Release Key: Enter the release key in the
Key field and press ‘Install Software’. You will be presented
with a new page where you select the software package file
to upload.
V.35 Firmware Upgrade - Firmware Upgrade File: Press
‘Browse’ to select the firmware upgrade file and press “In-
stall Firmware” to proceed with the firmware upload.
There are two different version of the TANDBERG
MPS software file. One standard software file
(s41000jxx.tar.gz), and one software file
(s41001jxx.tar.gz) without Encryption (without
AES and DES support).
For changes to take effect the unit must be restarted.
Restart - Press the Restart button. This will restart the MPS.
Important - Before Upgrading
To upgrade the TANDBERG MPS, a valid Release Key
and Software file is required. Please contact your
TANDBERG representative for more info.
106
Introduction
Quick
Setup
Using
the MPS
System
Status
Installation
Gateway
Configuration
MCU
Configuration
Technical
Descriptions
Appendices
Main
System
Configuration