TANDBERG MPS 800 Network Card User Manual


 
D 13373.08
NOVEMBER 2007
MPS
Table of
Contents
TANDBERG MPS
ADMINISTRATOR GUIDE
H.320 Board
Slot (1 to n)
Select Slot 1 to 6 to configure the H.320 (ISDN) board(s). The
illustration shows that Slot 1 and 3 are configured for H.320,
while Slot 2, 4, 5 and 6 are not configured.
Network Configuration
Network Conguration
Description
Enter a compulsory textual description to easier identify each
card.
Network Type
Select which type of H.320 (ISDN) network each of the ISDN
network cards are connected to:
PRI: ISDN Line
G.703: Leased line
PRI Board Configuration
!
Please ensure that Network Type is set to PRI for the
correct ISDN cards. This must correspond with the
Slots used in PRI Board Configuration.
!
Please ensure that Network Type is set to G.703 for
the correct ISDN cards. This must correspond with the
Slots used in G.703 Board Configuration.
Press the Save button
to save changes
87
Introduction
Quick
Setup
Using
the MPS
System
Status
Installation
Gateway
Configuration
MCU
Configuration
Technical
Descriptions
Appendices
Main
System
Configuration