TANDBERG MPS 800 Network Card User Manual


  Open as PDF
of 179
 
D 13373.08
NOVEMBER 2007
MPS
Table of
Contents
TANDBERG MPS
ADMINISTRATOR GUIDE
Technical Specications
Advanced diagnostic tools
Automatic/manual error control
NETWORKINTERFACES
2 x LAN/Ethernet (RJ-45) 10/100 Mbit on the
system controller board
Up to 8 x LAN/Ethernet (RJ-45) 10/100 Mbit for
media processing board
Up to 32 x E1/T1 (RJ-45) for ISDN PRIs and/or G.703
Up to 128 x V.35/RS-366 ports
ETHERNET/INTERNET/INTRANETCONNECTIVITY
TCP/IP, SSL, ARP, Telnet, HTTP, HTTPS, XML, SOAP
Embedded web server for total conference and call
control
10/100 Mbps full/half duplex (manual or auto detect
selection)
OTHERSUPPORTEDSTANDARDS
H.221, H.231, H.241, H.242, H.243, H.245, H.320,
H.239, H.323, BONDING (ISO 13871), Q.931, SIP,
H261, H263+, H264, G711, G.722, G.722.1, G728,
MPEG4 AAC-LD
APPROVALS
Directive 73/23/EEC (Low Voltage Directive)
– Standard EN 60950
Directive 89/336/EEC (EMC Directive)
– Standard EN 55022, Class A
– Standard EN 55024
– Standard EN 61000-3-2/-3-3
Directive 1999/5/EEC (R&TTE Directive)
– Standard TBR4
Approved according to UL 60950 and CAN/CSA C22.2
No. 60950
Complies with FCC15B Class A
ENVIRONMENTALDATA
Operating temperature:
0°C to 35°C (32°F to 95°F) ambient temperature
Relative Humidity (RH):
10% to 90%
Storage and transport temperature:
-20 to 60°C (-4°F to 140°F) at RH 10–90% (non-
condensing)
POWER
100–240 VAC, 50/60 Hz;
800W max. power consumption
UNITDIMENSIONS
Height 9U/399 mm/15.7”
Width 444 mm/17.4”
Depth 371 mm/14.6”
Net weight 44 lbs/20.0 kg
19” rack-mountable
* MCU only
** Binary Floor Control Protocol
All specifications subject to change without notice,
system specifics may vary.
All images in these materials are for representational
purposes only, actual products may d i f f e r.
TANDBERG and Expressway are registered trademarks
or trademarks of TANDBERG in the U.S. and other
countries.
All other trademarks are property of their respective
owners.
TANDBERG MPS 800 (2:2)
170
Introduction
Quick
Setup
Using
the MPS
System
Status
System
Configuration
Installation
Gateway
Configuration
MCU
Configuration
Technical
Descriptions
Main
Appendices
 previous next