Filter
Top Products
D 13373.08
NOVEMBER 2007
MPS
Table of
Contents
TANDBERG MPS
ADMINISTRATOR GUIDE
Approvals
⭿ 㢝
㷳 A 儶ℶ❐᧨⦷䞮㿊䘾⬒₼᧨年ℶ❐♾厌↩抯㒟㡯兎䟄㓿ᇭ⦷扨䱜㍔⑄ₚ᧨♾厌榏尐䞷㓆⺈␅
㓿摖♥⒖⸭♾嫛䤓㘹㡌ᇭ
WARNING:
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
Product Approvals and Declarations
The product has been approved by various international ap-
proval agencies, among others: CSA and Nemko. According to
their Follow-Up Inspection Scheme, these agencies also perform
production inspections at a regular basis, for all production of
TANDBERG’s equipment.
The test reports and certificates issued by the approval agen-
cies show that the TANDBERG MPS complies with the following
standards.
EMC Emission - Radiated Electromagnetic Interference
EN55022:1994 + A1:1995 + A2:1997 (CISPR 22:1993 + •
Corr. and Am.1 and Am.2) Class A (Comply with EU’s Com-
mission Decision 89/336/EEC).
FCC Rules and Regulations Part 15, Subpart B, Class A.•
EMC Immunity
EN 55024:1998 + A1:2001 + A2: 2003•
EN 61000-3-2:2000•
EN 61000-3-3:1995 + A1:2001•
(Comply with EU’s Commission Decision 89/336/EEC).•
Electrical Safety
IEC 60950-1 edition 2001•
EN 60950-1 edition 2001 +A11:2004•
UL 60950-1. 1st Edition•
CSA 60950-1-03•
Product Approvals
EC DECLARATION OF CONFORMITY TANDBERG MPS 200
MANUFACTURER: TANDBERG Telecom AS
PRODUCT NAME: TANDBERG MPS 200
TYPE NUMBER: TTC3-02
DESCRIPTION: Media Processing System
This product complies with Commission Directives:
LVD 73/23/EEC
EMC 89/336/EEC
R&TTE 99/5/EEC
This product complies with harmonized standards:
EN 60950-1 : 2001
EN 55022 : 1994, A1/A2
EN 55024 : 1998, A1/A2
EN 61000-3-2 : 2000
EN 61000-3-3 : 1995, A1
TBR 4 Layer 1, 2 and 3
TECHNICAL CONSTRUCTION FILE NO.: X13513
YEAR WHICH THE CE-MARK WAS AFFIXED: 2005
For an official, signed version of this document, or details
regarding documentation from the technical construction file,
please contact TANDBERG
CE Declarations
EC DECLARATION OF CONFORMITY TANDBERG MPS 800
MANUFACTURER: TANDBERG Telecom AS
PRODUCT NAME: TANDBERG MPS 800
TYPE NUMBER: TTC3-01
DESCRIPTION: Media Processing System
This product complies with Commission Directives:
LVD 73/23/EEC
EMC 89/336/EEC
R&TTE 99/5/EEC
This product complies with harmonized standards:
EN 60950-1 : 2001
EN 55022 : 1994, A1/A2
EN 55024 : 1998, A1/A2
EN 61000-3-2 : 2000
EN 61000-3-3 : 1995, A1
TBR 4 Layer 1, 2 and 3
TECHNICAL CONSTRUCTION FILE NO.: D13391
YEAR WHICH THE CE-MARK WAS AFFIXED: 2004
For an official, signed version of this document, or details
regarding documentation from the technical construction file,
please contact TANDBERG.
A Class Product Declaration
171
Introduction
Quick
Setup
Using
the MPS
System
Status
System
Configuration
Installation
Gateway
Configuration
MCU
Configuration
Technical
Descriptions
Main
Appendices