Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
5-15
If you set an automatic shutoff time, the copier will automatically go into the OFF mode (unneeded
electricity is cut off) when it is left inactive for a pre-determined period of time (default setting: 60 min-
utes).
The “Off mode” is the name of the function when the copier is used by itself. If the optional printer and/or
facsimile funciton is installed, the mode name becomes the “Sleep mode”. However, the setting proce-
dures for both modes are the same.
Setting the Automatic Shutoff Mode
1
Press the PROGRAM key to enter the program
menu. Then, press the AUTO SHUT OFF key.
• If the key for the desired function is not shown, press the
Next key to switch the screen.
2
On the display, select the period of time (in minutes)
allowed before the Automatic Shutoff mode is acti-
vated.
• The setting procedure finishes and the display returns to
the program menu screen.
Clearing the Automatic Shutoff Mode
Press any of the POWER , START , PRINTER/NETWORK ,
COPY and FAX keys on the control panel.
• The copier warms itself up for a while and the following mes-
sage appears.
READY
• While the copier is warming up, auto-start copying can be set.
Page 1-13
9. SETTING AUTOMATIC SHUTOFF MODE
Note
In the regions with power requirements of 200V, if the copier does not have the optional facsimile or
printer function installed, all the power is shut off when the copier goes into the auto shutoff mode. When
the optional facsimile or printers function is installed, only unneeded electricity is cut off in the auto
shutoff mode.