Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
7-4
WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
B
A
2. ADD PAPER SYMBOL (Cont.)
Adding Paper to the Large-Capacity Feeder (optional)
1
Pulling up the grip, draw out the large-capacity
feeder carefully until it comes to a stop.
2
Open some paper packages, take out entire reams
of paper and set them aligned in tray
ᎭᎭ
ᎭᎭ
Ꭽ and tray
ᎮᎮ
ᎮᎮ
Ꭾ.
• When setting the paper, set the paper for Ꭽ to the right
aside, and set it for Ꭾ to the left aside. (The paper can be
set neatly if you pile up the paper little by little alternately in
the tray Ꭽ and Ꭾ.) Be sure that the centre lever is not open
(Refer to the labels attached in the large-capacity feeder).
• Do not add paper above the line indicated on the guide.
• Up to 2500 sheets of paper (recommended by Toshiba) can
be set.
• Paper starts being fed from the elevator tray Ꭽ at first, and
when it runs out of paper, the paper on tray Ꭾ moves to the
position Ꭽ.
• Do not use creased, folded, wrinkled or damp sheets of
paper.
3
Close the cover of the large-capacity feeder.
• Close the cover completely. The elevator tray automatically
moves up to the paper feeding position.