Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
8-5
Copies are stained
Countermeasure
Close the cover firmly to shut out any outer
light.
Clean the original glass with a cloth moistened
with cleaning liquid, then wipe a dry cloth over
the glass.
Clean the original cover or transport belt with
a cloth moistened with a neutral detergent.
Then wipe the detergent completely off with a
dry cloth.
Set the image density properly with the AUTO
key or manual density keys.
Reference page
Page 1-2
Page 8-2
Page 8-2
Page 8-3
Page 3-15
Items to be checked
Is the original cover firmly
closed?
Is the original glass dirty?
Is the original cover dirty?
Is the transport belt of the op-
tional reversing automatic docu-
ment feeder dirty?
Is the image density set prop-
erly?
Copy images are blurred
Place the original firmly on the glass and close
the original cover.
Replace with new paper.
Page 1-2
Page 1-9
Does the entire original lie prop-
erly on the surface of the glass?
Is the copy paper moist?
Images are partially missing
Select the same size of copy paper as the origi-
nal, or set the reproduction ratio suitable for
the paper size.
Set a smaller image shift value.
Page 3-6
Page 4-2
Are the original size and direc-
tion, as well as the reproduction
ratio suitable for the paper size?
Is the margin on the copy set
properly?
Touch panel screen is not easy to see
Use the touch panel contrast adjustment knob
on the back side of the control panel.
Page 1-2Is the brightness adjusted?