Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
3-15
4. COPY DENSITY ADJUSTMENT
There are two types of image density adjustments: automatic mode (default setting) and manual mode.
In the automatic mode, the sensors automatically detect the density of each original and select the
optimum image density. In the manual mode, you can select the desired level of image density. It is
recommended that lighter-density originals be copied in the manual copy density mode.
Automatic Copy Density Mode
1
Set the original(s). Page 2-4
2
Confirm that “AUTO” is displayed on the basic
screen.
• If the automatic density mode is not selected, press the
MANUAL key, then press the AUTO key on the next screen.
Select other copy modes as required.
3
Press the START key.