Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
3-16
SETTING OF BASIC COPY MODES
Manual Copy Density Mode
1
Set the original(s). Page 2-4
2
Press the AUTO on the basic screen.
3
Press either or key to adjust the copy density
to the desired level.
• Each time you press the or key, your copies will be-
come lighter or darker, respectively.
• When the DENSITY LEVEL key is shown on the lower left
of the screen, you can adjust the density manually on the
basic screen.
Select other copy modes as required.
4
Press the START key.
4. COPY DENSITY ADJUSTMENT (Cont.)