Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
5-2
USING THE SPECIAL FUNCTIONS
1. CONTINUOUS ORIGINAL FEEDING/SINGLE ORIGINAL FEEDING
When using the reversing automatic document feeder (optional), you can select the continuous feed
mode (default setting) where multiple (or single) originals are continuously fed in one by one, or the
single-feed mode where if you insert an original, it is automatically pulled in and starts being copied.
Continuous Feed Mode
1
Set the original(s). Page 2-6
• Maximum number of originals that can be set Page 2-4
2
Press the PROGRAM key to enter the program
menu, and press the ADF key.
• If the key for the desired function is not shown, press the
Pre key to switch the display.
3
Press the ADF key.
Select other copy modes as required.
4
Press the START key.
Tip
When the number of originals is too large to be set at one
time, you can divide the originals into two sets and set them
one after another. To do so, press the CONTINUE key while
the scanning of the first set is in progress. After the first set
has been scanned, place the next set of originals in the re-
versing automatic document feeder.