Toshiba e-STUDIO35 Copier User Manual


 
1
2
3
4
5
6
7
8
9
10
11
12
3
PREFACE
Thank you for purchasing the Toshiba Digital Copier e-STUDIO45/35. This Operator’s Manual describes
the following:
• how to use the digital copier
• how to inspect and carry out maintenance on the digital copier
• how to remedy mechanical and copying problems
Before using the digital copier, thoroughly read and understand this Operator’s Manual. To ensure that
clean copies are made at all times and to keep your digital copier in optimum working order, this Operator’s
Manual should be readily available for future reference.
When the digital copier is used as a printer and a FAX, be sure to read the Operator’s Manual for Printing
Functions and the Operator’s Manual for Facsimile Functions.
COPYRIGHT 2000
TOSHIBA TEC COPORATION
To ensure correct and safe use of the Toshiba Digital Copier e-STUDIO45/35, this Operator’s Manual
describes safety precautions according to the following three levels of warning:
Before reading this Operator’s Manual, you should fully understand the meaning and importance of
these signal words.
Warning ..Indicates a potentially hazardous situation which, if not avoided, could result in death,
serious injury, or serious damage, or fire in the equipment or surrounding assets.
Caution ...Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury, partial damage of the equipment or surrounding assets, or loss of data.
Note ........Indicates a procedure you should follow to ensure the optimal performance of the digital
copier and problem-free copying.
Tip ..........Describes handy information that is useful to know when operating the digital copier.
Advice.....Describes an operation you should follow to keep the digital copier in good working order.
Warning
This is a Class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
1. Do not touch the connector terminal when disconnecting the cables of peripheral equipment.
2. Before opening any covers or removing any units from the copier, discharge the static electricity
from your body by touching a metal part of the copier.
This product is carrying the CE-Mark in accordance with the related European Directives. Responsible
for CE-marking is Toshiba Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany. Phone +49-
2131-158-01.