Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
5-8
USING THE SPECIAL FUNCTIONS
4. COPYING ON SPECIAL TYPES OF PAPER
1
Set the original(s). Page 2-4
2
Place the paper on the sheet bypass and set the
paper size.
• Bypass copying Page 3-4
3
Press the PROGRAM key to enter the program
menu. Then, press the SPECIAL PAPER key.
• If the key for the desired function is not shown, press the
Pre key to switch back to the previous screen.
When making copies using thick sheets of paper or transparecy (OHP) film sheets, use this mode for
improved toner image fusibility.
* Be sure to set thick paper and transparency (OHP) films on the sheet bypass.
* To output the transparency (OHP) films on the inner tray, install the guide for it. Page 5-9
4
Press the THICK PAPER (or TRANSPARENCY )
key.
Select other copy modes as required.
5
Press the START key.
Tip
When outputting transparency (OHP) films, remove the films
one by one every time they exit.