Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
3-2
SETTING OF BASIC COPY MODES
1. PAPER SELECTION
Automatic Paper Selection (APS)
When you place regular-sized originals on the glass or in the reversing automatic document feeder
(optional), the built-in sensors automatically work to detect the size of the originals, helping the copier
select and copy on paper that is the same size as the original. (This mode is default setting.)
* Depending on the condition of the original, automatic paper selection may not work correctly. In that
case, select the paper size manually.
Page 3-3
* This mode can only be used for actual-size (100%) copying.
* For automatically selectable sizes of originals
Page 2-4
1
Confirm that the Automatic Paper Selection mode
is selected on the basic screen.
2
Set the original(s). Page 2-4
• If the Automatic Paper Selection mode is not selected, press
the ZOOM··· key, then press the APS key on the next
screen.
• If the following messages are shown, proceed as you are
told to:
Change direction of original
Set correct cassette
Select other copy modes as required.
3
Press the START key.