Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
7-29
When the CALL SERVICE symbol flashes, the following message appears and copying is no longer
possible. Turn off the POWER switch and call your service technician.
Call for service
When the CALL SERVICE
or CLEAR PAPER symbol is
flashing, if you press the
CLEAR/STOP key and the digital
key 8 together, the corresponding error code will appear on the
copy quantity display only while both keys are held down. Please
inform of the error code in addition when you are asking for ser-
vice.
Note
Since heaters are used to fix toner images to the copy paper, a safety circuit is incorporated in this
copier. After you turn on the main power switch (* press the
POWER key on the control panel when the
copier is in the auto shutoff mode), if a certain temperature is not attained within a certain period of time,
the safety circuit assumes that something abnormal has happened, causing the copier to stop its opera-
tion. This can possibly occur when the temperature is low even if the copier is not malfunctioning. If this
occurs, turn the power switch off and then on again (* same as above). Repeat this procedure twice, and
if the problem still persists, turn off the power switch and call for service.
8. CALL SERVICE SYMBOL