Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
5-5
3. MODE MEMORY COPYING
Storing a Combination of Copy Modes
1
Select the desired copy modes.
Example:
Reproduction ratio .........................................................71%
Copy quantity ........................................................ 10 copies
Copy density ......................................................... Automatic
Paper size .....................................................................A4-R
• Confirm that each mode is set correctly.
2
Press the PROGRAM key to enter the program
menu. Then, press the MODE MEMORY key.
• If the key for the desired function is not shown, press the
Pre key to switch the screen.
You can store and recall a combination of frequently used copy modes at any time. Up to four such
combinations of modes can be stored.
* You can not delete the copy modes that have already been stored in the memory, but you can rewrite
new modes on the memory key in which some copy modes have already been stored.
3
Press the MEMORY key.
4
Press the MEMORY 1 ( MEMORY 2 , MEMORY 3
or MEMORY 4 ) key.
• The copy modes are stored in [MEMORY 1] ([MEMORY
2], [MEMORY 3] or [MEMORY 4]).
• The stored copy modes remain unchanged until different
copy modes are entered. (They are retained even after the
power switch is turned off.)