Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
7-22
WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
5. ADDING STAPLES (Cont.)
4
Push in a new staple case into the staple cartridge
completely inside until a click is heard.
• Do not remove the seal holding the staples before the staple
case is set in the cartridge.
5
Pull out the seal holding the staples straight.
6
Return the staple cartridge to its original position.
• Insert the cartridge until it is caught by the claw and fixed
with a click sound.
Note
If the following message remains displayed, repeat the above
procedure from steps 1 to 6.
Set staple cartridge