Filter
Top Products
Power and PowerUp Modes
Portégé M200 615
Portégé M200 Version
1
Last Saved on 03/11/2003 12:04
ENGLISH using Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN
User Token field
■ Create (button)
You can use an SD card token, instead of entering the password.
After you have registered a password, insert an SD card and click
Create. You can use an SD card of any capacity, but it must be
formatted correctly.
If an unformatted card or one with an incompatible format is inserted,
you will be prompted to format it with a tool named TOSHIBA SD
Memory Card Format. To start the format tool, point to or click the
following items: Start > All Programs > TOSHIBA SD Card Utilities
> TOSHIBA SD Memory Card Format
When you format an SD Memory card, all data will be deleted. Be sure to
save data on the card to other media before you format the card.
■ Disable (button)
Click this button to invalidate the token. You cannot revalidate old
tokens, but you can use the same SD cards to create new tokens.
Supervisor password
If you set a supervisor password, some functions might be restricted
when a user logs on with the user password. To set a supervisor
password, execute the file TOSUP.EXE. The file is located at:
C:\Program Files\Toshiba\Windows Utilities\
SVPWTool\TOSUP.EXE
This utility lets you do the following:
■ Register, delete or change the supervisor password.
■ Create or invalidate a supervisor token
This function in the TOSHIBA password utility lets you invalidate only
supervisor tokens or all tokens, including user and supervisor tokens.
■ Specify restrictions for general users.