Filter
Top Products
Troubleshooting
Portégé M200 917
Portégé M200 Version
1
Last Saved on 03/11/2003 12:04
ENGLISH using Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN
Real Time Clock
Problem Procedure
The following message
is displayed on the
LCD: RTC battery is
low or CMOS
checksum is
inconsistent. Press F1
key to set Date/Time.
The battery for RTC is wearing. Set the date and
time in BIOS setup with the following steps:
1. Press F1 key. BIOS setup will boot up.
2. Set the date in System Date.
3. Set the time in System Time.
4. Press End key.
Confirmation message will appear.
5. Press Y key. BIOS setup will terminate and
the computer will be rebooted.
If you need further assistance
If you require any additional help using your computer or if you are having
problems operating the computer, you may need to contact TOSHIBA for
additional technical assistance.
Before you call
Some problems you experience may be related to software or the
operating system, it is important to investigate other sources of
assistance first. Before contacting TOSHIBA, try the following:
■ Review troubleshooting sections in the documentation for software
and peripheral devices.
■ If a problem occurs when you are running software applications,
consult the software documentation for troubleshooting suggestions.
Call the software company’s technical support for assistance.
■ Consult the dealer you purchased your computer and/or software
from. They are your best sources for current information and support.
Where to write
If you are still unable to solve the problem and suspect that it is hardware
related, write to TOSHIBA at the location listed in the accompanying
warranty booklet or visit www.toshibaeurope.com on the Internet