Filter
Top Products
Optional Devices
Portégé M200 88
Portégé M200 Version
1
Last Saved on 03/11/2003 12:04
ENGLISH using Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN
5. Insert the memory module obliquely against the connector of the
memory module slot. Gently push the memory module until it is
secured in place.
The memory module slot consists of two sub slots (connectors): Slot A
(lower slot) and Slot B (upper slot).
Align the grooves of the memory module with the locking tabs of the
connector and insert the module into the connector firmly. If you find it
difficult to install the memory module, try to adjust the tabs of the
connector with a pen tip or other tools. Make sure to hold the memory
module with your fingers on the side edges (sides with grooves).
SLOT B SLOT A
Inserting a module (1)
6. Reinstall the cover of the memory module slot. Fasten the screw you
removed in Step 4.
Be sure that the cover is closed firmly.
Seating the memory module cover
7. Reinstall the Battery Pack.
After installing a memory module, turn the power of the computer on to
see a total memory size. The system will calculate the total memory size.