Filter
Top Products
Operating Basics
Portégé M200 46
Portégé M200 Version
1
Last Saved on 03/11/2003 12:04
ENGLISH using Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN
Replacing the pen tip
PEN TIP DRAWOUT TOOL
Replacing the pen tip
1. To replace the pen tip, pinch the tip with a drawout tool and pull it
out.
2. Insert a new tip into the Tablet PC Pen at the flat end of the tip and
press it to seat securely.
Short and worn pen point is difficult to pull out. Replace the pen point
with refill before it becomes too short.
TOSHIBA recommends the customer to keep another pen set as a spare.
You can buy the pen set from TOSHIBA dealer.
Do not use the broken pen tip. When it breaks, replace it with a refill
delivered with the Tablet PC Pen. Use of the broken pen tip causes to
make scratches on the display panel. When the reserve refills have run
out, purchase a new pen set from a TOSHIBA dealer.