Filter
Top Products
Optional Devices
Portégé M200 812
Portégé M200 Version
1
Last Saved on 03/11/2003 12:04
ENGLISH using Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. The computer supports VGA and Super VGA video
modes. To connect a monitor, follow the steps below.
1. Turn the computer off.
2. Connect the monitor to the external monitor port.
3. Turn the monitor’s power on.
4. Turn the computer on.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is colouror monochrome.
To change the display settings, press Fn + F5. If you disconnect the
monitor before you turn the computer off, be sure to press Fn + F5 to
switch to the internal display. Refer to Chapter 5, The Keyboard, for
details on using hot keys to change the display setting.
Tablet PC Pen set
Use it as a spare to your computer. Spare pen tip and drawout tool are
included. Refer to Chapter 4, Operating Basics, for the detailed usage.
Reserve Pen
Supplied pen uses a pen instead of Supplied pen at the time of loss or
breakage. The pen is set inside the computer, which connects a battery
pack. Refer to Chapter 4, Operating Basics, for the detailed usage.