Filter
Top Products
Troubleshooting
Portégé M200 99
Portégé M200 Version
1
Last Saved on 03/11/2003 12:04
ENGLISH using Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN
Infrared port
Refer also to the documentation for your IrDA compatible device and
related software.
Problem Procedure
Infrared devices do
not work as expected
Check that the device is connected to an electric
outlet. Make sure the outlet is supplying power
by plugging in an appliance.
Make sure there is no obstruction blocking
communication between the computer and the
target device.
If problems persist, contact your dealer.
Pointing device
If you are using a USB mouse, also refer to the USB section in this
chapter and to your mouse documentation.
TOSHIBA tablet pen
Problem Procedure
Onscreen pointer
does not respond to
tablet pen operation
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
The tablet Pen mi
g
ht be set unable to use. Press
Fn + F9 keys to change Pen setting to enabled.
Tablet pen and on
screen pointer do not
move in the same
manner
Adjust the coordinate axis in the following
procedure.
1. Open the Control Panel and click Printer
and other Hardware.
2. Click the Tablet and Pen setting.
3. Select screen orientation with Calibrate in
Setting tab.
4. Click Calibrate button.
5. Click the cross in Calibrate the screen and
click OK.
Unable input from
tablet pen
Adjust the setting in the following procedure.
1. Open the Control Panel and click Printer
and other Hardware.
2. Click the Tablet and Pen setting.
3. Adjust setting of each item of Pen options
tab and click OK.