Filter
Top Products
Operating Basics
Portégé M200 427
Portégé M200 Version
1
Last Saved on 03/11/2003 12:04
ENGLISH using Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN
Connecting
To connect the internal modem cable, follow the steps below.
The modular cable that comes with the computer must be used to
connect a modem. Connect the end of the modular cable with the core to
the computer.
In case of a lightning storm, unplug the modem cable from the telephone
jack.
Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack.
MODEM JACK
Connecting the internal modem
Do not pull on the cable or move the computer while the cable is
connected.
If you use a storage device such as a CDROM drive or HDD connected to
a 16bit PC card, you might experience the following modem problems:
3. Modem speed is slow or communication is interrupted.
4. Skip may occur in sound.
Disconnecting
To disconnect the internal modem cable, follow the steps below:
1. Pinch the lever on the connector in the telephone jack and pull out the
connector.
2. Disconnect the cable from the computer in the same manner.