Filter
Top Products
HW Setup
Portégé M200 74
Portégé M200 Version
1
Last Saved on 03/11/2003 12:04
ENGLISH using Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN
This procedure does not affect the settings.
Use hot keys.
1. Hold down F12 and boot the computer.
2. The following menu will be displayed with the following icons: Builtin
HDD, CDROM, FDD (or SD memory Card), Network (LAN), PCA (ATA)
card boot.
A bar will appear only under the selected device.
3. Use the left/right cursor keys to highlight the boot device you want
and press Enter.
If a supervisor password is set, the menu above does not appear when
you use the user password to start the computer.
The selection method above does not change the boot priority settings in
HW Setup.
If you press a key other than one of those above or if the selected device
is not installed, the system will boot according to the current setting in HW
Setup.