Filter
Top Products
V.90
Portégé M200 I3
Portégé M200 Version
1
Last Saved on 03/11/2003 12:04
ENGLISH using Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN
* EC stands for the Error Control method, which appears only when the
extended result codes configuration option is enabled. EC is replaced
by one of the following symbols, depending on the error control
method used.
V42bis V.42 error control and V.42bis data compression
V42 V.42 error control only
NoEC No error control protocol
AT Command
V90=* V.90 Dial Line Rate
V90 sets the maximum V.90 downstream that
the modem attempts to connect.
V90=0 V.90 disabled
V90=1 V.90 enabled: automatic speed selection
maximum modem speed (default)