Toshiba tecra m2 Laptop User Manual


 
2 Troubleshooting Procedures 2.13 Wireless LAN Troubleshooting
2.13 Wireless LAN Troubleshooting
This section describes how to determine if the computer's Wireless LAN is functioning
properly. Perform the steps below starting with Procedure 1 and continuing with the other
procedures as required.
Procedure 1: Diagnostic Test Program Execution Check
Procedure 2: Connection Check
Procedure 3: Replacement Check
Procedure 1 Diagnostic Test Program Execution Check
Make sure the wireless switch on the left side of the computer is turned “On”. If it is not,
slide the switch toward the back of the computer to turn it on.
Check 1 Execute the Wireless LAN test program to check the transmitting-receiving
function of the wireless LAN. You will need a second computer that can
communicate by the wireless LAN. Perform the test following the instructions
described in Section 3.16-18, Wireless LAN Test Program.
If the computer passes the test, the function is correctly working.
If the computer does not pass the test, perform Procedure 2.
2-50 TECRA M2 Maintenance Manual (960-468)