Filter
Top Products
4 Replacement Procedures 4.26 Hinge
3. Remove the two mask seals and the following screws of the LCD cover.
• M2.5×2.8B FLAT HEAD screw ×2
4. Remove the following screws securing the hinges on the LCD cover.
• M2.5×5B FLAT HEAD screw ×2
Hin
g
e
Mask seal
M2.5×5B FLAT HEAD
M2.5×5B FLAT HEAD
M2.5×2.8B FLAT HEAD
Hinge
M2.5×2.8B FLAT HEAD Mask seal
Figure 4-58 Removing the hinge (1)
4-84 TECRA M2 Maintenance Manual (960-468)