Filter
Top Products
4.16 Sound board 4 Replacement Procedures
Installing the Sound board
To install the sound board, follow the steps below and refer to figure 4-31 and 4-32.
1. Install the HDD con holder and secure it with the following screw.
• M2.5×4B FLAT HEAD screw ×1
2. Install the sound board from the right side.
3. Connect the sound board cable to the connector PJ9511 on the sound board and the
connector PJ9501 on the system board and stick the glass tape.
4. Connect the sound board flexible cable to the connector PJ9510 on the sound board
and the connector PJ9500 on the system board.
TECRA M2 Maintenance Manual (960-468) 4-51