Filter
Top Products
4.25 Microphone/Wireless LAN antenna/Bluetooth antenna 4 Replacement Procedures
4.25 Microphone/Wireless LAN antenna/Bluetooth antenna
Removing the Microphone/Wireless LAN antenna/Bluetooth antenna
To remove the microphone/wireless LAN antenna/Bluetooth antenna, follow the steps below
and refer to figures 4-54 and 4-55.
1. Remove the hinge cap (right).
2. Peel off the four acetate tapes.
3. Take out the microphone from the slot while passing the cable from the hole.
Hinge cap
Microphone
Acetate tape
Acetate tape
Acetate tape
Figure 4-54 Removing the microphone
TECRA M2 Maintenance Manual (960-468) 4-79