Filter
Top Products
4 Replacement Procedures 4.5 HDD
NOTE: The following steps describe how to disassemble the HDD pack; however, do not
disassemble if the HDD is working properly.
4. Place the HDD pack on a flat surface, and remove the following screws.
• M3×4Z FLAT HEAD screw ×4
5. Separate the HDD from the HDD bracket.
CAUTION: Do not apply pressure to the top or bottom of the HDD.
M3×4Z FLAT HEAD
HDD
Figure 4-6 Separating the HDD
HDD bracket
M3
×
4Z FLAT HEAD
4-14 TECRA M2 Maintenance Manual (960-468)