Filter
Top Products
4 Replacement Procedures 4.11 Cover/Touch pad
4 Replacement Procedures
4.11 Cover/Touch pad
Removing the Cover/Touch pad
To remove the cover/touch pad, follow the steps below and refer to figures 4-18 to 4-23.
1. Turn the computer face down and remove the following screws.
• M2.5×4B FLAT HEAD screw ×1 (“4B” in the figure below)
• M2.5×6B FLAT HEAD screw ×7 (“6” in the figure below)
• M2.5×16B FLAT HEAD screw ×1 (“16” in the figure below)
• M2×4Z BIND screw ×1 (“4” in the figure below)
or
• M2×4 Stick screw ×1 (“4” in the figure below)
6
6
16
6
4B
6
6
6
4
6
Figure 4-18 Removing the cover (1)
4-32 TECRA M2 Maintenance Manual (960-468)