Filter
Top Products
4 Replacement Procedures 4.5 HDD
4.5 HDD
CAUTION: When handling the HDD, do not press the top surface as shown by the arrow.
Hold it by the sides.
Removing the HDD
To remove the HDD, follow the steps below and refer to figures 4-4 to 4-6.
1. Turn the computer upside down.
2. Remove the following screw securing the HDD cover. Remove the HDD cover by
lifting it up.
• M2.5×4B FLAT HEAD screw ×1
M2.5
×
4B FLAT HEAD
HDD cover
Figure 4-4 Removing the HDD cover
4-12 TECRA M2 Maintenance Manual (960-468)