Filter
Top Products
4.19 Fan 4 Replacement Procedures
4.19 Fan
Removing the Fan
To remove the fan, follow the steps below and refer to figure 4-37.
1. Remove the following screws securing the fan.
• M2.5×4B FLAT HEAD screw ×2
2. Disconnect the fan cable from the connector PJ8770 on the system board.
3. Remove the fan.
M2.5×4B FLAT HEAD
Fan cable
PJ8770
Fan
Figure4-37 Removing the fan
TECRA M2 Maintenance Manual (960-468) 4-57