Filter
Top Products
3.29 SETUP 3 Tests and Diagnostics
(c) Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP Sets the port mode to Extended Capabilities Port (ECP). For
most printers, the port should be set to ECP. (Default)
Std. Bi-Direct.
This setting should be used with some other parallel devices.
(d) Hard Disk Mode
Use this item to select the hard disk mode.
Enhanced IDE Select this mode when using an operating system that
(Normal) supports Enhanced IDE. (Default)
Standard IDE Select this mode when using an operating system that
does not support Enhanced IDE.
NOTE: Formats for Enhanced IDE and Standard IDE are different, so if you change the
setting, you will have to reformat the hard disk for the appropriate setting.
15. Legacy Emulation.
(a) USB KB/Mouse Legacy Emulation.
Use this option to enable or disable USB KB/Mouse Legacy Emulation. If
your operating system does not support USB, you can still use a USB mouse
and keyboard by setting the USB KB/Mouse Legacy Emulation item to
Enabled.
Enabled USB Legacy Support can be used. (Default)
Disabled USB Legacy Support cannot be used.
(b) USB-FDD Legacy Emulation.
Use this option to enable or disable USB-FDD Legacy Emulation.
Enabled USB Legacy Support can be used. (Default)
Disabled USB Legacy Support cannot be used.
16. PCI LAN
This option enables/disables the Built-in LAN functions.
(a) Built-in LAN
Enabled Enables Built-in LAN functions. (Default)
Disabled Disables Built-in LAN functions.
TECRA M2 Maintenance Manual (960-468) 3-91