Filter
Top Products
4.25 Microphone/Wireless LAN antenna/Bluetooth antenna 4 Replacement Procedures
Installing the Microphone/Wireless LAN antenna/Bluetooth antenna
To install the microphone/wireless LAN antenna/Bluetooth antenna, follow the steps below
and refer to figures 4-54 and 4-55.
1. Set the microphone into the slot while passing through the cable in place.
2. Stick the four acetate tapes.
3. Stick the wireless LAN antennas and Bluetooth antenna.
4. Pass the wireless LAN antenna cables and Bluetooth antenna cable through the
hole and set them in place.
5. Secure the wireless LAN antenna cables and Bluetooth antenna cable with the
nine acetate tapes.
6. Install the hinge cap (right).
TECRA M2 Maintenance Manual (960-468) 4-81