Filter
Top Products
4 Replacement Procedures 4.17 LAN jack
4.17 LAN jack
Removing the LAN jack
To remove the LAN jack, follow the steps below and refer to figure 4-33.
1. Disconnect the LAN jack cable from the connector PJ4100 on the system board.
2. Remove the LAN jack from the slot.
LAN jack
LAN jack cable
PJ4100
Figure 4-33 Removing the LAN jack
Installing the LAN jack
To install the LAN jack, follow the steps below and refer to figure 4-33.
1. Install the LAN jack to the slot.
2. Connect the LAN jack cable to the connector PJ4100 on the system board.
4-52 TECRA M2 Maintenance Manual (960-468)