Filter
Top Products
17-2
Command Reference Guide
17.2. Command Summary
Function Command Syntax
Command Access Level
Admin. SuperUser User ViewOnly
Display
Circuit Status /S [Enter] X X X X
Circuit Group Status /SG [Enter] X X X X
Network Status /SN [Enter] X X
Help Menu /H [Enter] X X X X
Log Functions /L [Enter] X X
Site ID / Unit Information /J [*] [Enter] X X X X
Control
Exit Command Mode /X [Enter] X X X X
Connect - Local <Remote> /C 1[Enter] X X X
Switch Circuit c to Position A /TA <c>[,Y] [Enter] X X X
Switch Circuit c to Position B /TB <c>[,Y] [Enter] X X X
Switch Circuit c to Position p /T <c>,<p>[,Y] [Enter] X X X
Default All Circuits /DC[,Y] [Enter] X X X
Send Parameter File /U [Enter] X
Send SSH Keys /K <n> [Enter] X
Unlock Invalid Access /UL [Enter] X
Outbound Telnet /TELNET <ip>[port][raw][Enter] X X X
Outbound SSH /SSH <ip> -l <username>[Enter] X X X
Configuration
System Parameters /F [Enter] X
Serial Port Parameters /P [Enter] X
Circuit Parameters /PC [Enter] X
Circuit Group Parameters /G [Enter] X
Network Configuration /N [Enter] X
Ping-No-Answer Function /PNA [Enter] X
Alarm Configuration /AC [Enter] X
Reboot System /I [Enter] X X
Upgrade Firmware /UF [Enter] X
Test Network Configuration /TEST [Enter] X X
In Administrator and SuperUser modes, all circuits are displayed. In User and ViewOnly modes, the
status screen will only include the circuits that are allowed by the account.
In Administrator and SuperUser modes, all Circuit Groups are displayed. In User and ViewOnly modes,
the Circuit Group Status Screen will only include the Circuit Groups allowed by the account.
In Administrator Mode, Help Menus will list all commands. In SuperUser, User and ViewOnly modes,
Help Menus will only list the commands allowed by the access level.
User Mode accounts will be allowed to connect to the Serial Port only if Serial Access is enabled for the
account.
The ",Y" argument can be included to suppress the command confirmation prompt.
The "Default All Circuits" command will only be applied to the Circuits that are allowed by the account.
In order to invoke this command, Outbound Telnet/SSH and Outbound Service Access must be enabled
for your account.
In SuperUser mode, configuration menus can be displayed, but parameters cannot be changed.
User Mode and ViewOnly accounts are allowed to view existing Ping-No-Answer settings, but are not
allowed to add or modify settings.
In SuperUser mode, the /I command only offers one option: Reboot Only (Do Not Default Parameters.)