Western Telematic AFS-16-1 Switch User Manual


 
7-6
Alarm Configuration
• EmailMessage: Enables/Disables email notification for this alarm. (Default = On.)
Note:Ifeitherofthe"CopytoAllTriggers"optionsisselected,thenemail
notificationforotheralarmswillbeswitchedOnorOffasindicatedbythis
parameter.
Address1,2,and3: These parameters are used to determine which of the
three email addresses defined via the "Email Messages" menu will receive
the email alarm notification messages generated by this alarm. The Address
parameters can be used to select one, or any combination of the addresses
defined via the Email Messages menu. (Default = All On.)
Note:IfEmailaddresseshavebeenpreviouslyspecified,thenthetextunder
theparameterswilllistthecurrent,userdefinedemailaddresses.
• Subject: This parameter is used to define the text that will appear in the "Subject"
field for all email notification messages that are generated by this alarm.
(Default = "Alarm: Ping-No-Answer")
• ContactOutputEnable: Activates/deactivates the Output Contacts on the
AFS-16 Control Module AUX Connector. When the Contact Output Enable
parameter is set to "On", the Common line will be switched from the Normally
Closed contact to the Normally Open contact when a Ping-No-Answer Alarm
is generated. For more information on the Output Contacts, please refer to
Section 7.1. (Default = On.)
Note:Ifeitherofthe"CopytoAllTriggers"optionsisselected,thentheContact
OutputEnableparameterforotheralarmswillalsobeenabledordisabledas
specifiedbythisparameter.