5-5
Basic Configuration
5.3. Defining System Parameters
The System Parameters menus are used to define the Site ID Message, set the system
clock and calendar, set up log functions and calibrate temperature readings.
To access the System Parameters menu via the Text Interface, type /F and press
[Enter]. To access the System Parameters menu via the Web Browser Interface, place
the cursor over the "General Parameters" link, wait for the flyout menu to appear and
then click on the "System Parameters" link. The System Parameters Menus are used to
define the following:
• UserDirectory: This function is used to view, add, modify and delete user
accounts and passwords. As discussed in Section 5.4 and Section 5.5, the User
Directory allows you to set the security level for each account as well as determine
which circuits each account will be allowed to control.
Note:The"UserDirectory"optiondoesnotappearintheWebBrowser
Interface’sSystemParametersmenuandisinsteadaccessedviathe"Users"
linkonthelefthandsideofthemenu.
• SiteID: A text field, generally used to note the installation site or name for the
AFS-16 unit. (Up to 32 chars.; Default = undefined.)
Note:TheSiteI.D.willbeclearediftheAFS-16isresettodefaultsettings.
• RealTimeClock: This prompt provides access to the Real Time Clock menu,
which is used to set the clock and calendar, and to enable and configure the NTP
(Network Time Protocol) feature as described in Section 5.3.1.
Note:The"RealTimeClock"optiondoesnotappearintheWebBrowser
Interface’sSystemParametersmenu,andisinstead,accessedviathe"Real
TimeClock"linkonthelefthandsideofthescreen.
• InvalidAccessLockout: If desired, this feature can be used to automatically
disable the Network Port or RS232 Port after a user specified number of
unsuccessful login attempts are made. For more information, please refer to
Section 5.3.2. (Default = On, 9 Attempts, 30 Minute Duration.)
Note:The"InvalidAccessLockout"itemdoesnotappearintheWebBrowser
Interface’sSystemParametersmenu,andisinstead,accessedviathelinkon
thelefthandsideofthescreen.
• TemperatureFormat: Determines whether the temperature is displayed as
Fahrenheit or Celsius. (Default = Fahrenheit.)
• TemperatureCalibration: Used to calibrate the unit's internal temperature sensing
abilities. To calibrate the temperature, place a thermometer inside your equipment
rack, in a location that usually experiences the highest temperature. After a few
minutes, take a reading from the thermometer, and then key the reading into the
configuration menu. In the Web Browser Interface, the temperature is entered
at the System Parameters menu, in the Temperature Calibration field; in the Text
Interface, the temperature is entered in a submenu of the System Parameters menu,
which is accessed via the Temperature Calibration item. (Default = undefined.)