9-4
Operation
9.2. A/B Switching - Text Interface
When using the Text Interface, all A/B switching functions are performed by invoking
simple, ASCII commands. The Text Interface includes a Help Menu, which summarizes
all available AFS-16 commands. To display the Text Interface Help Menu (Figure 9.1),
type /H and press [Enter].
Note:WhentheHelpMenuisdisplayedbyanaccountthatpermitsSuperUser,
UserorViewOnlylevelcommands,thescreenwillnotincludecommandsthat
areonlyavailabletoAdministrators.
9.2.1. The Circuit Status Screen - Text Interface
When you login to the AFS-16 command mode via the Text Interface, the first screen
displayed after login is the Circuit Status Screen. The Circuit Status Screen lists
the current status of the AFS-16’s Circuit Modules, and also displays the current
temperature, Monitor/Alarm Input status, Alarm Contact Output status and the
user-defined Site I.D. Message. The Circuit Status Screen will be re-displayed each time
a command is successfully executed.
COMMAND MENU: Version 1.00
DISPLAY CONFIGURATION
/S Circuit Status /F System Parameters
/SG Circuit Group Status /P Port Parameters
/SN Network Status /PC Circuit Parameters
/L Log /G Circuit Group Parameters
/J [*] Site ID /N Network Conguration
/PNA Ping No Answer
CONTROL /AC Alarm Conguration
/X Exit Command Mode /I Reboot System
/C <n> Connect - Local /UF Upgrade Firmware
/D <n> Disconnect Port /TEST Test Network Options
/TA <s> Switch To Circuit Position A +-------------------------------+
/TB <s> Switch To Circuit Position B | n Port #/name |
/T <c,p> Switch To Circuit Position | s s+s s:s Circuit #/name |
/DC Default Circuit Position | c c,c c-c Circuit #/name |
/U Send Parameter File | p Position (A or B) |
/K <k> Send SSH Keys | k Key type (1-3) |
/UL Unlock (Invalid Access) | * “all” |
| <> Required entry |
| [] Optional entry |
Add ,Y to bypass “Sure?” +-------------------------------+
AFS>
Figure9.1:TheHelpMenu(AdministratorMode;TextInterface)