Western Telematic AFS-16-1 Switch User Manual


  Open as PDF
of 135
 
8-3
The Status Screens
8.4. The Circuit Group Status Screen
The Circuit Group Status screen shows the configuration details and A/B switching
status for the AFS-16's user-defined Circuit Groups.
Notes:
• WhentheCircuitGroupStatusScreenisviewedbyanaccountwith
AdministratororSuperUsercommandaccess,allAFS-16CircuitModules
andCircuitGroupswillbeshown.WhentheCircuitStatusScreenisviewed
byanaccountwithUserorViewOnlycommandaccess,thentheunitwill
onlydisplaytheCircuitModulesandCircuitGroupsthatareallowedbythe
account.
• InordertodisplaytheCircuitGroupStatusscreen,youmustfirstdefineat
leastoneCircuitGroupasdescribedinSection5.7.
To display the Circuit Group Status Screen via the Text Interface, type /SG and then
press [Enter]. To display the Circuit Group Status Screen via the Web Browser
Interface, click on the "Circuit Group Status" link. The Circuit Group Status Screen will
list the following parameters for each Circuit Group:
• GroupName: The user-defined name for each Circuit Group.
• CircuitName(Common): The user-defined name for each Circuit Module. This
name may also be used describe the device that is connected to the common line
for each Circuit Module.
• Circuit: The number of each Circuit Module in the Circuit Group.
• Pos: The currently selected A/B circuit path for each Circuit Module.
• Reason: This field displays a brief description of the reason for the last successful
switching operation at each Circuit Module.
• Mon: This field will contain a "X" if the corresponding Circuit Module has been
configured to be switched by the Monitor/Alarm Input feature.
 previous next